Back to all reports

Missing steel Bollard- Beaufort Rd BS5

Reported in the Street Furniture category anonymously at 14:49, Wed 13 June 2018

Sent to Bristol City Council less than a minute later

Missing steel bollard from pavement outside Avonview Cemetary, (approx 120 Beaufort Rd). Bollard was preventing vehicles mounting pavement as pavement busy with pedestrians. Please replace asap

RSS feed of updates to this problem Receive email when updates are left on this problem.

Updates

  • Customer follow up.

    Posted by Bristol City Council at 13:20, Mon 25 June 2018

  • There has been no progress and the viechles and espiecally very big lorries has got worse it is not safe to stand on the pavement

    Posted anonymously at 14:16, Mon 25 June 2018

  • Customer follow up.

    Posted by Bristol City Council at 09:20, Thu 5 July 2018

  • There has been no work carried out and the safety on the pavement risk is worse than ever,someone is going to have a serious accident just walking on the pavement,the hedge outside the cemetery cannot be cut as the traffic is so bad on the pavement it is absolutely dissgusting that nothing has been done yet,next step local councillor

    Posted anonymously at 10:19, Thu 5 July 2018

  • Under investigation.

    Posted by Bristol City Council at 15:19, Tue 7 August 2018

  • Customer follow up.

    Posted by Bristol City Council at 17:55, Tue 7 August 2018

  • Nothing been done so far still same problem.

    Posted anonymously at 18:54, Tue 7 August 2018

  • Reallocated.

    Posted by Bristol City Council at 09:05, Wed 8 August 2018

  • Job raised.

    Posted by Bristol City Council at 12:11, Wed 8 August 2018

  • Your enquiry has been investigated and deemed that no action is required at present.

    Posted by Bristol City Council at 20:55, Thu 4 October 2018

  • The bollard has now been replaced thank you bristol city council for making our pavement safe again to walk down.

    State changed to: Fixed

    Posted anonymously at 21:51, Thu 4 October 2018

This report is now closed to updates. You can make a new report in the same location.