Back to all reports

Request to reinstall two missing bollards, Avonvale Road - Mildred Street corner

Reported in the Street Furniture category anonymously at 14:21, Tue 29 September 2020

Sent to Bristol City Council less than a minute later

At the Avonvale Road and Mildred Street corner there are two missing bollards. There is a disturbance in the pavement concrete on the actual corner by the last remaining bollard which shows where one previously was before, but has since been knocked over, removed and never reinstated.

Right by this corner there is also a tactile crossing that crosses from the billboard by Hamblins to the Gold Star takeaway on the other street corner opposite. As you can see in the attached photo, a bollard is missing here too, which allows careless motorists to park here blocking not only the tactile crossing, but also causing a dangerous bottleneck on this section of Avonvale Road.

I request that the missing bollards be reinstated here.

RSS feed of updates to this problem Receive email when updates are left on this problem.

Updates

  • A new enquiry has been raised for this issue.

    Posted by Bristol City Council at 14:21, Tue 29 September 2020

  • This issue is currently under investigation. We'll provide updates on the outcome as soon as we can.

    Posted by Bristol City Council at 14:50, Tue 29 September 2020

  • A citizen has provided a follow-up to the original enquiry.

    Posted by Bristol City Council at 10:01, Fri 2 October 2020

  • A job has been raised with our contractors to action this issue and appropriate repairs or maintenance will be undertaken as soon as they can.

    Posted by Bristol City Council at 10:08, Fri 2 October 2020

  • Update - Some bollards have now been installed on the street corner.

    State changed to: Fixed

    Posted anonymously at 15:10, Mon 21 December 2020

  • This enquiry is now closed. No further action is required.

    Posted by Bristol City Council at 15:10, Mon 21 December 2020

This report is now closed to updates. You can make a new report in the same location.